BMW i4 Charging at Tesla Supercharger

BMW i4 Charger Won't Start? Step-by-Step Solutions

You've plugged in the CCS2 cable to your BMW i4's right rear charge port, but nothing happens. This is one of the most common frustrations at public chargers. The good news is that most causes are fixable on the spot.

Symptoms

• CCS2 connector is plugged into the right rear port but the charger screen shows no vehicle detected
• Charger displays an error code and refuses to start the session
• My BMW app shows the car is plugged in but not charging
• The charge port LED on the i4 flashes or stays amber instead of turning blue
• Authentication via app or RFID card goes through but charging never begins

What to Do

1. 1

   Unplug the CCS2 cable and reseat it firmly

   Pull the connector out completely. Check the pins for debris or damage. Line it up straight with the charge port on the right rear and push until you hear a clear click. The charge port LED should respond.

2. 2

   Check the charge port LED color on the car

   Blue pulsing means the car is ready to charge. Amber or yellow means something is wrong on the car side. No light at all may mean the port isn't detecting the cable. Open the My BMW app for more detail.

3. 3

   Disable any charging schedule in iDrive

   On the iDrive curved display, go to the charging settings and check for active schedules or departure times. Disable scheduled charging temporarily if you want to charge immediately at a public station.

4. 4

   Try authenticating again or use a different method

   If Plug & Charge didn't start the session, open the charging network's app and start manually. If the app fails, try an RFID card. If you're using BMW Charging, check that your payment method is current in the My BMW app.

5. 5

   Restart the charger if possible

   Some chargers have a stop/reset button on the screen. Unplug, wait 30 seconds, and try again. If the charger has two cables, try the other connector. Check the charger's screen for error messages or an out-of-service notice.

6. 6

   Move to a different charger if the problem persists

   If nothing works after two attempts, the charger is likely faulty. Use the My BMW app or a charging map to find the next nearest station. Report the broken charger through the network's app to help other drivers.

BMW i4 Charging Payment Failed? How to Fix It Now

You're at the charger, the CCS2 cable is plugged into your BMW i4, but payment won't go through. Maybe Plug & Charge didn't kick in, the app is throwing errors, or your card was declined. Here's how to sort it out and start charging.

Symptoms

• Plug & Charge doesn't activate when you connect the CCS2 cable
• BMW Charging shows a payment error in the My BMW app
• The charger screen says authentication failed or payment declined
• Your RFID card is not recognized at this charging station
• Contactless card payment at the charger terminal is rejected

What to Do

1. 1

   Check if Plug & Charge is set up in the My BMW app

   Open the My BMW app, go to your charging settings, and verify that Plug & Charge is enabled and linked to an active payment method. If you see a setup prompt, complete it before trying again.

2. 2

   Update your payment method in BMW Charging

   In the My BMW app, navigate to your BMW Charging account and check your stored payment card. Update it if it's expired or recently replaced. The change should take effect within a few minutes.

3. 3

   Try the charging network's own app

   Identify which company operates the charger (the logo is usually on the unit). Download their app, create an account, add a payment method, and start the session through their app instead of BMW Charging.

4. 4

   Use a different RFID card or contactless payment

   If you have another RFID card from a different network, try that. Some chargers also accept contactless debit or credit cards. Look for a payment terminal on the charger, usually near the screen.

5. 5

   Try a different charger at the same station or a nearby station

   Sometimes a single charger's payment terminal malfunctions while others work fine. Try the next unit over. If the whole station is problematic, use iDrive navigation to find an alternative station nearby.

BMW i4 Charging Slower Than Expected? Fixes Here

Your BMW i4 eDrive40 supports up to 205 kW DC fast charging, but real-world speeds often fall short. Several factors specific to the i4's 80.7 kWh battery and 400V architecture can limit charging power. Here's how to diagnose and fix slow charging on your i4.

Symptoms

• DC charging speed stays well below 205 kW even at a high-power charger
• Charging curve drops sharply before reaching 60% state of charge
• AC charging at home or destination chargers maxes out at 3.6 kW instead of 11 kW
• iDrive curved display shows a lower charging rate than the charger's rated output
• Estimated charging time on the iDrive screen is much longer than expected

What to Do

1. 1

   Use iDrive navigation to route to your charging stop

   Enter the charging station as a waypoint or destination in iDrive. The i4 will automatically precondition the battery while you drive, warming it to the ideal temperature for fast charging. This alone can double your charging speed in cold weather.

2. 2

   Arrive at the charger with a lower state of charge

   The i4 charges fastest between 10% and 50%. If possible, plan your stop so you arrive closer to 10-20%. The difference between arriving at 15% versus 50% can save significant time.

3. 3

   Choose a charger stall that isn't sharing power

   Look at the charger setup. If two CCS2 cables come from one cabinet, pick a stall where the neighboring connector is free. Some stations label paired stalls with A/B designations.

4. 4

   Check your AC charging setup at home

   Open the My BMW app and look at the charging details during an AC session. If you're only getting 3.6 kW, your installation likely provides single-phase power. Ask your electrician about a three-phase connection to unlock the full 11 kW.

5. 5

   Check the charging status on the iDrive curved display

   While charging, the iDrive screen shows current power, estimated time remaining, and battery temperature. If power is low and battery temperature is also low, the car is still warming the pack. Give it a few minutes to ramp up.

6. 6

   Unplug at 80% and drive to the next charger if needed

   Charging from 80% to 100% on DC can take as long as 10% to 80%. On road trips, it's almost always faster to charge to 80%, drive, and stop again rather than waiting for a full charge.

Non-Tesla vehicle cannot find the station in the Tesla app

You arrive at a Supercharger with your non-Tesla EV but the station does not appear in the Tesla app, or it shows as Tesla-only.

Symptoms

• Tesla app shows the station but does not list it as open to other brands
• Station appears on the map but the 'Start Charging' button is grayed out
• App says 'This location is not available for your vehicle'
• You can see other non-Tesla vehicles charging but the app will not let you start

How to Fix It

1. 1

   Confirm the station is open to non-Tesla vehicles

   Not all Supercharger locations are open to other brands. In the Tesla app, look for stations marked with a label indicating non-Tesla access. If there is no such label, the station is Tesla-only.

2. 2

   Update the Tesla app

   Tesla frequently adds new non-Tesla locations. If your app is outdated, recently opened stations may not appear as accessible. Update to the latest version.

3. 3

   Check your Tesla account setup

   You need a Tesla account with a valid payment method added, even if you do not own a Tesla. Open the app, go to your account settings, and confirm a credit or debit card is saved.

4. 4

   Try selecting the specific stall number

   After plugging in, open the Tesla app, select the station, and tap the stall number that matches the one you plugged into. The stall number is printed on the charger post.

5. 5

   Restart the Tesla app

   Force-close and reopen the app. Location and station data sometimes fails to load correctly on the first attempt.

Payment hold is larger than expected

Tesla places a pre-authorization hold on your payment method when you start a Supercharger session. This hold can be surprisingly large and may temporarily reduce your available balance.

Symptoms

• Bank notification shows a hold of 50 to 120 EUR before charging begins
• Available balance on your debit card drops significantly
• Multiple holds appear from previous sessions that have not been released yet
• Hold amount does not match the actual charging cost

How to Fix It

1. 1

   Understand that holds are temporary

   Tesla pre-authorizes a fixed amount to ensure payment. The actual charge replaces the hold once the session is complete. The hold typically releases within 1 to 5 business days depending on your bank.

2. 2

   Use a credit card instead of a debit card

   Credit cards handle pre-authorization holds without affecting your available cash balance. Debit cards temporarily lock the held amount from your account.

3. 3

   Check the Tesla app for final session cost

   After charging, the Tesla app shows the actual amount you will be billed. This is always less than or equal to the pre-authorization hold.

4. 4

   Contact your bank if holds persist beyond 7 days

   If a hold has not been released after a week, contact your bank and provide the transaction reference from the Tesla app. Banks can manually release stale holds.

Session ends early or stops unexpectedly

Charging stops before reaching your target battery level. The car disconnects or the Supercharger stops delivering power mid-session.

Symptoms

• Charging stops at 80% even though you set a higher limit
• Session ends after a few minutes with no error message
• Car shows 'Charging interrupted' or 'Check charge cable'
• Supercharger light turns from green to red or flashing

How to Fix It

1. 1

   Check your charge limit setting

   Tesla vehicles default to an 80% charge limit. Non-Tesla vehicles have their own limit settings in the infotainment system. Verify you have set the limit above where charging stopped.

2. 2

   Reseat the cable connector

   Unplug the cable, inspect the connector and your vehicle's charge port for debris, and plug it back in firmly. A loose connection can cause the session to drop.

3. 3

   Try a different stall

   Individual Supercharger stalls can have intermittent faults. Move to another stall, preferably one that is not paired with an active session (stalls sharing a power cabinet are usually labeled with paired numbers like 1A/1B).

4. 4

   Check for idle fees

   If you reached your charge limit and did not unplug promptly, Tesla may have ended the session and started idle fees. Check the Tesla app for notifications.

5. 5

   Restart your vehicle

   For non-Tesla vehicles, turn the car off completely, wait 30 seconds, and turn it back on. Then plug in again. Some vehicles need a restart to clear communication errors with the Supercharger.

Reduced charging speed due to power sharing

Your charging speed is significantly lower than the station's advertised maximum. This often happens because Supercharger stalls share power with a paired stall.

Symptoms

• Charging at 60 to 80 kW at a station rated for 250 kW
• Speed dropped when another vehicle plugged in at a nearby stall
• Speed is much lower than you got at the same station previously
• One stall charges fast while the paired stall is very slow

How to Fix It

1. 1

   Move to an unpaired stall

   Tesla Supercharger stalls are paired (for example, 1A and 1B share a power cabinet). If someone is using 1A, stall 1B will be slower. Choose a stall where neither paired unit is occupied.

2. 2

   Look at the stall labels

   Paired stalls usually share a number with A/B suffixes, or are directly adjacent. At V3 Superchargers (250 kW), power sharing is less of an issue than at older V2 stations (150 kW).

3. 3

   Check your battery temperature

   Tesla vehicles precondition the battery automatically when navigating to a Supercharger. If you did not use Tesla navigation (or you drive a non-Tesla), the battery may be cold and limiting charge speed on its own.

4. 4

   Arrive with a lower state of charge

   Charging speed decreases as the battery fills. For the fastest stop, arrive between 5 and 20% if you can do so safely. The difference in charge speed between arriving at 10% versus 40% is significant.

Non-Tesla vehicle CCS2 connector issues

At Supercharger stations open to non-Tesla vehicles, the CCS2 connector may not work correctly with your car. In Europe, open Supercharger stations have native CCS2 cables, so no adapter is needed.

Symptoms

• The CCS2 connector does not lock into your vehicle's charge port
• Session starts but drops after a few seconds
• Tesla app does not recognize your vehicle after plugging in
• The connector fits but no power is delivered

How to Fix It

1. 1

   Make sure you are using the CCS2 cable, not the Tesla connector

   Open Supercharger stations in Europe have separate CCS2 cables alongside Tesla connectors, or dedicated CCS2 posts. Use the CCS2 cable for non-Tesla vehicles.

2. 2

   Push the connector in firmly until it clicks

   CCS2 connectors need a firm push to fully seat and lock. If the connector is loose, the charger cannot communicate with your vehicle.

3. 3

   Start the session through the Tesla app

   Select the correct stall number in the Tesla app and start the session. The stall number is printed on the charger post. It must match exactly.

4. 4

   Try a different stall

   Individual stalls can have faulty connectors. Move to another stall, preferably one that is not paired with an active session.

5. 5

   Check vehicle compatibility

   Not all non-Tesla vehicles work perfectly at every Supercharger station. If your vehicle repeatedly fails to connect, check Tesla's website or app for your vehicle's compatibility status.