BMW i4 Charging at Neste

BMW i4 Charger Won't Start? Step-by-Step Solutions

You've plugged in the CCS2 cable to your BMW i4's right rear charge port, but nothing happens. This is one of the most common frustrations at public chargers. The good news is that most causes are fixable on the spot.

Symptoms

• CCS2 connector is plugged into the right rear port but the charger screen shows no vehicle detected
• Charger displays an error code and refuses to start the session
• My BMW app shows the car is plugged in but not charging
• The charge port LED on the i4 flashes or stays amber instead of turning blue
• Authentication via app or RFID card goes through but charging never begins

What to Do

1. 1

   Unplug the CCS2 cable and reseat it firmly

   Pull the connector out completely. Check the pins for debris or damage. Line it up straight with the charge port on the right rear and push until you hear a clear click. The charge port LED should respond.

2. 2

   Check the charge port LED color on the car

   Blue pulsing means the car is ready to charge. Amber or yellow means something is wrong on the car side. No light at all may mean the port isn't detecting the cable. Open the My BMW app for more detail.

3. 3

   Disable any charging schedule in iDrive

   On the iDrive curved display, go to the charging settings and check for active schedules or departure times. Disable scheduled charging temporarily if you want to charge immediately at a public station.

4. 4

   Try authenticating again or use a different method

   If Plug & Charge didn't start the session, open the charging network's app and start manually. If the app fails, try an RFID card. If you're using BMW Charging, check that your payment method is current in the My BMW app.

5. 5

   Restart the charger if possible

   Some chargers have a stop/reset button on the screen. Unplug, wait 30 seconds, and try again. If the charger has two cables, try the other connector. Check the charger's screen for error messages or an out-of-service notice.

6. 6

   Move to a different charger if the problem persists

   If nothing works after two attempts, the charger is likely faulty. Use the My BMW app or a charging map to find the next nearest station. Report the broken charger through the network's app to help other drivers.

BMW i4 Charging Payment Failed? How to Fix It Now

You're at the charger, the CCS2 cable is plugged into your BMW i4, but payment won't go through. Maybe Plug & Charge didn't kick in, the app is throwing errors, or your card was declined. Here's how to sort it out and start charging.

Symptoms

• Plug & Charge doesn't activate when you connect the CCS2 cable
• BMW Charging shows a payment error in the My BMW app
• The charger screen says authentication failed or payment declined
• Your RFID card is not recognized at this charging station
• Contactless card payment at the charger terminal is rejected

What to Do

1. 1

   Check if Plug & Charge is set up in the My BMW app

   Open the My BMW app, go to your charging settings, and verify that Plug & Charge is enabled and linked to an active payment method. If you see a setup prompt, complete it before trying again.

2. 2

   Update your payment method in BMW Charging

   In the My BMW app, navigate to your BMW Charging account and check your stored payment card. Update it if it's expired or recently replaced. The change should take effect within a few minutes.

3. 3

   Try the charging network's own app

   Identify which company operates the charger (the logo is usually on the unit). Download their app, create an account, add a payment method, and start the session through their app instead of BMW Charging.

4. 4

   Use a different RFID card or contactless payment

   If you have another RFID card from a different network, try that. Some chargers also accept contactless debit or credit cards. Look for a payment terminal on the charger, usually near the screen.

5. 5

   Try a different charger at the same station or a nearby station

   Sometimes a single charger's payment terminal malfunctions while others work fine. Try the next unit over. If the whole station is problematic, use iDrive navigation to find an alternative station nearby.

BMW i4 Charging Slower Than Expected? Fixes Here

Your BMW i4 eDrive40 supports up to 205 kW DC fast charging, but real-world speeds often fall short. Several factors specific to the i4's 80.7 kWh battery and 400V architecture can limit charging power. Here's how to diagnose and fix slow charging on your i4.

Symptoms

• DC charging speed stays well below 205 kW even at a high-power charger
• Charging curve drops sharply before reaching 60% state of charge
• AC charging at home or destination chargers maxes out at 3.6 kW instead of 11 kW
• iDrive curved display shows a lower charging rate than the charger's rated output
• Estimated charging time on the iDrive screen is much longer than expected

What to Do

1. 1

   Use iDrive navigation to route to your charging stop

   Enter the charging station as a waypoint or destination in iDrive. The i4 will automatically precondition the battery while you drive, warming it to the ideal temperature for fast charging. This alone can double your charging speed in cold weather.

2. 2

   Arrive at the charger with a lower state of charge

   The i4 charges fastest between 10% and 50%. If possible, plan your stop so you arrive closer to 10-20%. The difference between arriving at 15% versus 50% can save significant time.

3. 3

   Choose a charger stall that isn't sharing power

   Look at the charger setup. If two CCS2 cables come from one cabinet, pick a stall where the neighboring connector is free. Some stations label paired stalls with A/B designations.

4. 4

   Check your AC charging setup at home

   Open the My BMW app and look at the charging details during an AC session. If you're only getting 3.6 kW, your installation likely provides single-phase power. Ask your electrician about a three-phase connection to unlock the full 11 kW.

5. 5

   Check the charging status on the iDrive curved display

   While charging, the iDrive screen shows current power, estimated time remaining, and battery temperature. If power is low and battery temperature is also low, the car is still warming the pack. Give it a few minutes to ramp up.

6. 6

   Unplug at 80% and drive to the next charger if needed

   Charging from 80% to 100% on DC can take as long as 10% to 80%. On road trips, it's almost always faster to charge to 80%, drive, and stop again rather than waiting for a full charge.

Confusing fuel station layout

Neste EV chargers are located at fuel stations alongside petrol and diesel pumps. First-time visitors often struggle to find the charger or accidentally drive to the fuel pump area instead.

Symptoms

• You drove into the fuel pump lane instead of the EV charging area
• The EV charger is around the back or side of the station, not visible from the entrance
• Signage for EV charging is missing or hard to see among fuel station branding
• You pulled up to what you thought was a charger but it is a compressed natural gas (CNG) pump

How to Fix It

1. 1

   Look for dedicated EV signage before pulling in

   Neste EV chargers are usually in a separate area from the fuel pumps, often to the side or behind the main station building. Look for green EV charging signs or CCS2 connector symbols.

2. 2

   Check the Neste app for a station map

   Some Neste station listings in the app include a layout or photo showing where the EV chargers are located relative to the fuel pumps. Check this before you arrive.

3. 3

   Drive past the fuel pump area

   If you do not see the charger immediately, continue driving past the fuel pumps. EV chargers at fuel stations are often placed at the edge of the property or near truck parking areas.

4. 4

   Ask the station staff

   Neste station staff can point you to the EV charging area. The indoor counter staff deal with this question regularly.

Neste app charging section is hard to find

The Neste app is primarily designed for fuel customers, loyalty programs, and car wash services. The EV charging feature can be buried in the navigation.

Symptoms

• You downloaded the Neste app but cannot find where to start an EV charging session
• The app homepage shows fuel prices and loyalty points but no obvious EV charging option
• You found a charger map but tapping on a station does not show a 'Start charging' button
• The app keeps directing you to fuel-related features instead of EV charging

How to Fix It

1. 1

   Look for a 'Charging' or 'EV' tab in the app

   Neste has been adding EV features gradually. The charging section may be under a dedicated tab, in the station details, or under a services menu. It is not always on the home screen.

2. 2

   Search for the specific station in the app

   Use the station finder and select the station you are at. The station details page should show whether EV charging is available and give you the option to start a session.

3. 3

   Use an alternative payment method

   If the app is frustrating, use contactless card payment or an RFID card directly at the charger. You do not need the Neste app to charge. The charger works independently.

4. 4

   Check if a third-party app has roaming access

   Neste chargers may be available through roaming networks. Apps like Virta, Plugsurfing, or Shell Recharge might offer access to Neste stations without using the Neste app at all.

RFID card works at fuel pumps but not at the charger

Your Neste loyalty card or fuel RFID card works for paying at the fuel pump but the EV charger does not recognize it. The fuel and EV charging systems use different authentication.

Symptoms

• Neste loyalty card tapped at the EV charger shows 'Card not recognized'
• Fuel RFID works at the pump but does nothing at the charger
• You assumed the same card works for everything at the Neste station
• Staff at the counter say the card should work but it does not

How to Fix It

1. 1

   Understand that fuel and EV charging use separate systems

   Neste's fuel payment infrastructure and EV charging infrastructure are different platforms. A card that authenticates at the pump may not be registered for EV charging.

2. 2

   Check which RFID cards the charger accepts

   Look at the charger screen or signage for logos of accepted charging networks. The charger may accept cards from Virta, Hubject partners, or other EV roaming networks, but not the Neste fuel loyalty card.

3. 3

   Use contactless bank card payment

   If your RFID card is not accepted, tap your debit or credit card on the contactless reader. This works independently of any loyalty program.

4. 4

   Register for EV charging in the Neste app

   If you want to use the Neste ecosystem for EV charging, you may need to activate EV charging as a separate service in your Neste account or app. This links your account to the charging platform.

Charger occupied during commute hours

Neste stations along commuter routes get heavy EV charging traffic during morning and evening rush hours. This is especially common at stations near highways and main roads.

Symptoms

• All chargers occupied when you arrive during morning or evening commute
• App shows the station as available but all stalls are in use when you get there
• Waiting 20+ minutes for a stall to free up
• Cars queued informally with no clear system for who is next

How to Fix It

1. 1

   Check real-time availability before driving to the station

   Use the Neste app or a third-party app to see how many stalls are currently free. Status may lag by a few minutes, so treat it as approximate.

2. 2

   Have a backup station in mind

   Before heading to a Neste station during peak hours, identify one or two alternatives within 10 to 15 minutes. Another Neste station, a competitor, or a supermarket charger nearby.

3. 3

   Shift your charging to off-peak if possible

   Charging at 06:00 or 21:00 instead of 08:00 or 17:30 dramatically reduces wait times at commuter-route stations.

4. 4

   Do not wait indefinitely

   If all stalls are occupied and there are cars waiting ahead of you, the math may not work. Two cars at 30 minutes each means an hour of waiting. Drive to the next available station instead.

Contactless payment has a minimum charge amount

Some Neste EV chargers require a minimum charge amount for contactless bank card transactions. If you only need a few kWh, the payment terminal may reject the transaction or apply a minimum fee.

Symptoms

• Contactless payment rejected with 'Below minimum amount' message
• You only wanted a quick top-up but the charger requires a minimum session value
• Pre-authorization hold is larger than the amount of energy you plan to use
• You are charged a minimum fee even for a very short session

How to Fix It

1. 1

   Check the minimum transaction amount on the charger screen

   The charger should display the minimum charge before you tap your card. This is typically 1 to 5 EUR depending on the payment processor.

2. 2

   Use an RFID card or app instead

   RFID cards and app-based sessions often do not have minimum transaction requirements. You pay only for the energy you use, even for short sessions.

3. 3

   Charge a bit longer to meet the minimum

   If you are just below the minimum, adding a few more kWh brings you above the threshold and you avoid any issues with the payment processor.

4. 4

   Understand the pre-authorization hold

   Contactless payments pre-authorize a fixed amount (often 50 to 100 EUR). The actual charge is calculated after the session ends. The difference between the hold and the actual charge is released back to your account within a few business days.