BMW i4 Charging at K-Lataus

BMW i4 Charger Won't Start? Step-by-Step Solutions

You've plugged in the CCS2 cable to your BMW i4's right rear charge port, but nothing happens. This is one of the most common frustrations at public chargers. The good news is that most causes are fixable on the spot.

Symptoms

• CCS2 connector is plugged into the right rear port but the charger screen shows no vehicle detected
• Charger displays an error code and refuses to start the session
• My BMW app shows the car is plugged in but not charging
• The charge port LED on the i4 flashes or stays amber instead of turning blue
• Authentication via app or RFID card goes through but charging never begins

What to Do

1. 1

   Unplug the CCS2 cable and reseat it firmly

   Pull the connector out completely. Check the pins for debris or damage. Line it up straight with the charge port on the right rear and push until you hear a clear click. The charge port LED should respond.

2. 2

   Check the charge port LED color on the car

   Blue pulsing means the car is ready to charge. Amber or yellow means something is wrong on the car side. No light at all may mean the port isn't detecting the cable. Open the My BMW app for more detail.

3. 3

   Disable any charging schedule in iDrive

   On the iDrive curved display, go to the charging settings and check for active schedules or departure times. Disable scheduled charging temporarily if you want to charge immediately at a public station.

4. 4

   Try authenticating again or use a different method

   If Plug & Charge didn't start the session, open the charging network's app and start manually. If the app fails, try an RFID card. If you're using BMW Charging, check that your payment method is current in the My BMW app.

5. 5

   Restart the charger if possible

   Some chargers have a stop/reset button on the screen. Unplug, wait 30 seconds, and try again. If the charger has two cables, try the other connector. Check the charger's screen for error messages or an out-of-service notice.

6. 6

   Move to a different charger if the problem persists

   If nothing works after two attempts, the charger is likely faulty. Use the My BMW app or a charging map to find the next nearest station. Report the broken charger through the network's app to help other drivers.

BMW i4 Charging Payment Failed? How to Fix It Now

You're at the charger, the CCS2 cable is plugged into your BMW i4, but payment won't go through. Maybe Plug & Charge didn't kick in, the app is throwing errors, or your card was declined. Here's how to sort it out and start charging.

Symptoms

• Plug & Charge doesn't activate when you connect the CCS2 cable
• BMW Charging shows a payment error in the My BMW app
• The charger screen says authentication failed or payment declined
• Your RFID card is not recognized at this charging station
• Contactless card payment at the charger terminal is rejected

What to Do

1. 1

   Check if Plug & Charge is set up in the My BMW app

   Open the My BMW app, go to your charging settings, and verify that Plug & Charge is enabled and linked to an active payment method. If you see a setup prompt, complete it before trying again.

2. 2

   Update your payment method in BMW Charging

   In the My BMW app, navigate to your BMW Charging account and check your stored payment card. Update it if it's expired or recently replaced. The change should take effect within a few minutes.

3. 3

   Try the charging network's own app

   Identify which company operates the charger (the logo is usually on the unit). Download their app, create an account, add a payment method, and start the session through their app instead of BMW Charging.

4. 4

   Use a different RFID card or contactless payment

   If you have another RFID card from a different network, try that. Some chargers also accept contactless debit or credit cards. Look for a payment terminal on the charger, usually near the screen.

5. 5

   Try a different charger at the same station or a nearby station

   Sometimes a single charger's payment terminal malfunctions while others work fine. Try the next unit over. If the whole station is problematic, use iDrive navigation to find an alternative station nearby.

BMW i4 Charging Slower Than Expected? Fixes Here

Your BMW i4 eDrive40 supports up to 205 kW DC fast charging, but real-world speeds often fall short. Several factors specific to the i4's 80.7 kWh battery and 400V architecture can limit charging power. Here's how to diagnose and fix slow charging on your i4.

Symptoms

• DC charging speed stays well below 205 kW even at a high-power charger
• Charging curve drops sharply before reaching 60% state of charge
• AC charging at home or destination chargers maxes out at 3.6 kW instead of 11 kW
• iDrive curved display shows a lower charging rate than the charger's rated output
• Estimated charging time on the iDrive screen is much longer than expected

What to Do

1. 1

   Use iDrive navigation to route to your charging stop

   Enter the charging station as a waypoint or destination in iDrive. The i4 will automatically precondition the battery while you drive, warming it to the ideal temperature for fast charging. This alone can double your charging speed in cold weather.

2. 2

   Arrive at the charger with a lower state of charge

   The i4 charges fastest between 10% and 50%. If possible, plan your stop so you arrive closer to 10-20%. The difference between arriving at 15% versus 50% can save significant time.

3. 3

   Choose a charger stall that isn't sharing power

   Look at the charger setup. If two CCS2 cables come from one cabinet, pick a stall where the neighboring connector is free. Some stations label paired stalls with A/B designations.

4. 4

   Check your AC charging setup at home

   Open the My BMW app and look at the charging details during an AC session. If you're only getting 3.6 kW, your installation likely provides single-phase power. Ask your electrician about a three-phase connection to unlock the full 11 kW.

5. 5

   Check the charging status on the iDrive curved display

   While charging, the iDrive screen shows current power, estimated time remaining, and battery temperature. If power is low and battery temperature is also low, the car is still warming the pack. Give it a few minutes to ramp up.

6. 6

   Unplug at 80% and drive to the next charger if needed

   Charging from 80% to 100% on DC can take as long as 10% to 80%. On road trips, it's almost always faster to charge to 80%, drive, and stop again rather than waiting for a full charge.

Session fails to start or charger shows an error

The charger does not begin charging after you plug in and authenticate. This can happen due to communication issues between your vehicle and the charger, or a problem with authentication.

Symptoms

• You plug in and authenticate but the charger displays an error
• The charger screen stays on the welcome screen and does not proceed
• The app shows 'session starting' but nothing happens at the charger
• The connector locks but no power flows

How to Fix It

1. 1

   Unplug, wait 30 seconds, and try again

   The initial communication handshake between your vehicle and the charger sometimes fails. Unplug the connector, wait at least 30 seconds, and reconnect. The second attempt often works.

2. 2

   Try starting the session from the K-Lataus app

   If RFID authentication is not working, open the K-Lataus app, select the station and charger, and start the session through the app instead.

3. 3

   Try a different charger unit at the same station

   If the station has multiple charger units, switch to another one. One unit may have a hardware issue while the others work fine.

4. 4

   Check that your vehicle is ready to charge

   Make sure your vehicle is not in a state that prevents charging, such as a charging schedule being active, the charge port not fully engaged, or a vehicle-side error. Check your vehicle's dashboard for any warnings.

Setting up the K-Lataus app for the first time

K-Lataus has its own dedicated app. First-time setup requires a K-Group account and a payment method linked specifically to the K-Lataus service.

Symptoms

• You are not sure which app to use for K-Lataus charging
• Your K-Group login works on the K-Group website but not in the K-Lataus app
• You cannot find a way to add a payment method for charging
• You cannot find the K-Lataus app in your app store

How to Fix It

1. 1

   Install the K-Lataus app

   Search for 'K-Lataus' in the App Store or Google Play and install it. This is the dedicated app for K-Lataus EV charging. K-Ruoka is for groceries, not for charging.

2. 2

   Log in with your K-Group credentials

   Use the same K-Group username and password you use for other K-Group services. If you do not have a K-Group account yet, you can create one in the app.

3. 3

   Add a payment method in the K-Lataus app

   Go to payment settings in the K-Lataus app and add a credit or debit card. The K-Lataus app manages its own payment methods separately from other K-Group services.

4. 4

   Find a station and start your first session

   Use the map in the K-Lataus app to find a nearby station. Plug in your vehicle, then tap Start in the app or use an RFID card to begin charging.

Parking time limits at grocery store locations

K-Lataus chargers sit in K-Citymarket and K-Market parking lots, which often have monitored parking with time limits. You may get a parking notice if you stay too long.

Symptoms

• You see parking time limit signs (e.g. 2 or 3 hours) in the parking lot
• You received a parking notice even though you were charging
• Your charging session takes longer than the allowed parking time
• Camera-monitored parking is active in the lot

How to Fix It

1. 1

   Check the parking rules when you arrive

   Most K-Citymarket and K-Market parking lots have posted time limits, often 2 to 4 hours, enforced by camera monitoring or a parking operator. These rules apply to EV charging spots too.

2. 2

   Use a parking disc if required

   Many Finnish parking lots still require a parking disc (pysäköintikiekko). Set the arrival time and display it on your dashboard, even if the lot also has camera monitoring.

3. 3

   Set a phone timer to move your car

   If you are shopping while charging, set an alarm so you can return before the parking limit expires. A DC fast charger at 200 kW should get you a substantial charge well within a 2-hour window.

4. 4

   Unplug when charging is complete

   Do not leave your vehicle occupying the charging spot after it finishes. Other EV drivers need the spot, and some parking operators treat finished-but-still-connected vehicles as overstaying.

New stations not appearing in third-party apps

K-Lataus is expanding its network, but newer stations sometimes take weeks to appear in third-party apps and aggregators like PlugShare or Google Maps.

Symptoms

• The K-Lataus app shows a station that does not appear in PlugShare or ABRP
• You planned a route using a third-party app and it skipped a nearby K-Lataus station
• A station listed as 'coming soon' in the K-Lataus app is actually already operational
• Google Maps does not show K-Lataus chargers at a location where you know they exist

How to Fix It

1. 1

   Use the K-Lataus app as the primary source for station locations

   The K-Lataus app is always the most up-to-date source for K-Lataus stations. Third-party apps rely on data feeds that may lag behind actual station openings by days or weeks.

2. 2

   Cross-check with the K-Lataus website

   The K-Lataus website also maintains a station map. Check it if the app is not giving you the information you need or if you want to plan ahead on a larger screen.

3. 3

   Report missing stations to third-party apps

   If you use PlugShare or ABRP regularly, you can add missing stations yourself. This helps other EV drivers find K-Lataus locations that are not yet in the database.

4. 4

   For route planning, combine K-Lataus with other network apps

   When planning a longer trip, check the K-Lataus app alongside ABRP or a similar route planner. The K-Lataus app shows the latest stations, while the route planner optimizes your overall charging stops across all networks.

Slow charging or failed sessions at older units in winter

Some older K-Lataus charger units perform less reliably in extreme cold. Winter in Finland brings temperatures that can affect both the charger hardware and your vehicle's battery.

Symptoms

• The charger takes a long time to initialize in freezing conditions
• Session fails with a generic error after a long handshake attempt
• Charging speed is much lower than expected at a 200 kW station
• The charger screen is slow to respond or displays incorrectly in cold weather

How to Fix It

1. 1

   Precondition your battery before arriving

   If your vehicle has a battery preconditioning feature (most newer EVs do), activate it before arriving at the charger. A warm battery accepts power faster and communicates more reliably with the charger during the initial handshake.

2. 2

   Try unplugging and reconnecting

   In cold weather, the initial handshake between your vehicle and the charger can time out. Unplug, wait 30 seconds, and try again. Sometimes the second attempt connects cleanly.

3. 3

   Try a different charger unit at the same station

   If the station has multiple charger units, one may be more reliable than the other. Older units can have more cold-weather issues than newer installations.

4. 4

   Report consistently problematic chargers

   If a specific charger unit fails repeatedly in cold weather, report it through the K-Lataus app. This helps K-Group identify hardware that needs maintenance or replacement.

5. 5

   Accept that cold weather reduces charging speed

   Even when everything works perfectly, a cold battery charges slower. This is a physics limitation, not a charger fault. The first 10 to 15 minutes of a session may be slower until the battery warms up from the charging current itself.