This guide uses approximate data. Charging speeds, prices, and compatibility depend on your specific vehicle variant, station hardware, and conditions. EVcourse is not affiliated with Audi or Ionity. Always check your vehicle manual and the charger screen.
Quick Overview
Step by Step
Find a Ionity station
Open the Ionity app or use a charging map like PlugShare to find a nearby station. Before you drive there, check that the station has an available CCS2 connector and is currently working.
Start your session
Good news: your Audi e-tron GT supports Plug & Charge on Ionity. Just plug in the cable and charging starts automatically. No app needed.
Plug in the CCS2 connector
Take the CCS2 cable from the charger and connect it to your Audi e-tron GT's charging port. You should hear a click when the connector locks in. Your car's display will confirm the connection.
Charging starts
Once connected, your Audi e-tron GT can pull up to 270 kW. On Ionity chargers (up to 350 kW), your effective maximum is 270 kW. You will see the current power and estimated time on either the charger screen or your car's display.
Charging speed is fastest when your battery is between 10% and 50%. It gradually slows as the battery fills up. This is normal and protects battery health.
When to unplug
For the fastest experience, unplug at 80%. Charging from 80% to 100% takes almost as long as 10% to 80% on most EVs, including the Audi e-tron GT. On a road trip, stopping at 80% and driving to the next charger is usually faster than waiting for 100%.
Charging Speed on Ionity
Your Audi e-tron GT peaks at 270 kW DC. It uses a 800V architecture. Ionity chargers go up to 350 kW, but your car's onboard limit caps you at 270 kW.
Charging from 10% to 80% takes about 18 minutes under good conditions.
Actual speed depends on several factors: battery temperature (cold batteries charge slower), your current state of charge (charging slows above 50-60%), and how many other cars are sharing the same station. If other cars are plugged in at the same location, the charger may split power between them.
Payment Options at Ionity
- Ionity app. Download the app, create an account, and link a payment method. Start and stop sessions from your phone.
- Contactless payment. Tap your bank card or phone on the charger's payment terminal. No account needed.
- Plug & Charge. On supported vehicles (including the Audi e-tron GT), just plug in and billing happens automatically.
Approximate ad-hoc price: 0.75 EUR/kWh. Actual prices vary by location and time. Subscriptions or roaming cards may offer lower rates.
Tips for Charging Audi e-tron GT on Ionity
- Use battery preconditioning before arriving at the charger. On the Audi e-tron GT, set your navigation to the Ionity station and the car will warm the battery automatically for faster charging speeds.
- Plug & Charge is supported. Just plug in the cable and charging starts automatically. No app, no card, no tapping.
- Charge to 80% for the fastest experience. Charging slows significantly above 80%, so stopping at 80% saves you the most time on road trips.
- Ionity pricing is on the higher side at around 0.75 EUR/kWh. Check if a subscription or roaming card gives you a better rate.
Stuck at the charger?
The free EVcourse app has step-by-step troubleshooting for 100+ real charging problems.
Get the free appRelated Guides
Having trouble? If something is not working at the charger, check our troubleshooting guide for Audi e-tron GT at Ionity.
Stuck at the charger? Open the app.
Step-by-step help for real charging problems. Log the experience. Free on iOS and Android.
Free to download · Available on iOS and Android